Cisco ASR 14000 Series Management Command Reference page 628

snmp-server throttle-time
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
snmp-server throttle-time
To specify the throttle time for handling incoming Simple Network Management Protocol (SNMP)
messages, use the snmp-server throttle-time command in global configuration mode. To restore the
throttle time to its default value, use the no form of this command.
Syntax Description
time
Defaults time: 0
Command Modes Global configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
snmp
Examples
In the following example, the throttle time is set to 500 msec:
RP/0/RP0/CPU0:Router(config)# snmp-server throttle-time 500
Related Commands Command
snmp-server
community-map
Cisco ASR 14000 Series Router System Management Command Reference
SMR-626
snmp-server throttle-time time
no snmp-server throttle-time
Throttle time for the incoming queue in msec. Values can be from 50 to 1000
msec.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Associates an SNMP community with an SNMP context, security name, or
target list.
SNMP Server Commands on Cisco IOS XR Software
OL-17231-01