Cisco ASR 14000 Series Management Command Reference page 66

show cdp interface
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show cdp interface
To display information about the interfaces on which Cisco Discovery Protocol (CDP) is enabled, use
the show cdp interface command in EXEC mode.
Syntax Description
type
interface-id
location node-id
Defaults
This command displays information about the interfaces on which CDP has been enabled.
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the show cdp interface command to display information about any CDP interfaces. When an
interface is specified in the command syntax, information is displayed about the specific interface. Not
specifying the interface displays information about all interfaces.
Task ID Task ID
cdp
Cisco ASR 14000 Series Router System Management Command Reference
SMR-64
show cdp interface [type interface-id | location node-id]
Interface type. For more information, use the question mark (?) online help
function.
Physical interface identifier. Naming notation is rack/slot/module/port and
a slash between values is required as part of the notation.
rack: Chassis number of the rack.
•
• slot: Physical slot number of the modular services card or line card.
• module: Module number. A physical layer interface module (PLIM) is
always 0.
• port: Physical port number of the interface.
For more information about the syntax for the router, use the question mark
(?) online help function.
(Optional) Displays detailed CDP information for the designated node. The
node-id argument is entered in the rack/slot/module notation.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
CDP Commands on Cisco IOS XR Software
OL-17231-01