Cisco ASR 14000 Series Management Command Reference page 727

Terminal Services Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
vty-pool
To create or modify a virtual terminal line (vty) pool, use the vty-pool command in global configuration
mode. To delete a vty pool, use the no form of this command.
Syntax Description
default
fm
pool-name
first-vty
last-vty
line-template
default
template-name
Defaults
default vty-pool: 5 vtys (vty 0 through 4) referencing the default line template.
fm vty pool: 6 vtys (vty 100 through 105) referencing the default line template.
Command Modes
Global configuration
Command History Release
Release 3.7.1
OL-17231-01
vty-pool {default | fm | pool-name} first-vty last-vty [line-template {default | template-name}]
no vty-pool {default | fm | pool-name} first-vty last-vty [line-template {default | template-name}]
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Specifies the default vty pool.
Specifies the fault manager vty pool.
User-defined vty pool.
First vty line in the pool.
• For the default vty pool, you must specify 0 for the first
vty line.
• For a user-defined vty pool, the range is 5 to 99.
• For the fault manager vty pool, you must specify 100 for
the first vty line.
Last vty line in the pool.
• The default vty pool must contain at least five vtys.
Range is 4 to 99.
• For a user-defined vty pool, the range is 5 to 99.
• The fault manager vty pool must contain at least six vtys.
Range is 105 to 199.
(Optional) Specifies the terminal template to be used in the
configuration of virtual terminals in the vty pool.
Specifies that the vty pool should reference the default
template.
User-defined template to be applied to the vtys in the vty
pool.
Cisco ASR 14000 Series Router System Management Command Reference
vty-pool
SMR-725