Cisco ASR 14000 Series Management Command Reference page 214

show running-config
show running-config
To display the contents of the currently running configuration or a subset of that configuration, use the
show running-config command in the appropriate mode.
Syntax Description
exclude
command
sanitized
Defaults The show running-config command without any arguments or keywords displays the entire contents of
the running configuration file.
Command Modes EXEC
Administration EXEC
Any configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
You can display either the entire running configuration or a subset of the running configuration. The
subset may be all the commands within a specified command mode.
In Cisco IOS XR software, the running configuration is automatically used at system startup, reset, or
Note
power cycle. The running configuration is the committed configuration.
Sanitized Output
Use the show running-config command with the sanitized keyword to display the contents of the active
running configuration without installation-specific parameters. Some configuration details, such as IP
addresses, are replaced with different addresses. The sanitized configuration can be used to share a
configuration without exposing the configuration details.
Command Modes
When the show running-config command is entered in administration configuration mode, the
configuration for the administration plane is displayed, including the configured logical routers for the
system. When the show running-config command is entered in any global configuration mode, or in
EXEC mode, the configuration for the specific secure domain router (SDR) is displayed.
Cisco ASR 14000 Series Router System Management Command Reference
SMR-212
show running-config [[exclude] command] [sanitized]
(Optional) Excludes a specific configuration from the display.
(Optional) Displays only a single command or a subset of commands
available under a specified command mode.
(Optional) Displays a sanitized configuration for safe distribution and
analysis.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Configuration Management Commands on Cisco IOS XR Software
OL-17231-01