Cisco ASR 14000 Series Management Command Reference page 716

terminal exec
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
terminal exec
To specify attributes for the current terminal session, use the terminal exec command in EXEC mode.
Syntax Description prompt
no-timestamp
timestamp
Defaults
No default behavior or values
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the terminal exec prompt timestamp command to show the timestamp display after each command
is entered. Use the terminal exec prompt no-timestamp command to disable the timestamp display.
The terminal commands are active for the current terminal session only. To apply a setting to all
Note
sessions, use the
Task ID Task ID
tty-access
Examples
The following example shows how to enable the timestamp prompt. When enabled, the date and time are
displayed after each command. In this example, the show version command is entered, and the date and
time is displayed.
RP/0/RP0/CPU0:router# terminal exec prompt timestamp
RP/0/RP0/CPU0:router# show version
Sun Aug 17 15:48:20.426 PST
Cisco IOS XR Software, Version 3.7.1.11I[SIT_IMAGE] Copyright (c) 2008 by Cisco Systems,
Inc.
Cisco ASR 14000 Series Router System Management Command Reference
SMR-714
terminal exec prompt {no-timestamp | timestamp}
Specifies the prompt attributes.
Disables the time-stamp printing before each command.
Enables the time-stamp printing before each command.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
line commands.
Operations
read
Terminal Services Commands on Cisco IOS XR Software
OL-17231-01