Cisco ASR 14000 Series Management Command Reference page 326

Router system

Hide thumbs Also See for ASR 14000 Series:

Table of Contents

C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1

To enable the HTTP server on the router and enable access to the Craft Works Interface (CWI), use the

http server command in global configuration mode. To disable the HTTP server, use the no form of this

Syntax Description

access-group name (Optional) Enables access to the CWI from IP addresses that meet the conditions

The HTTP server is disabled.

Command History

Release 3.7.1

Command Modes

Global configuration

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper

Use the http server command to enable the HTTP server on your router.

To display the home page of the router, use a Web browser pointed to http://x.x.x.x, where x.x.x.x is the

router IP address. If a name has been set, use http://router-name.

Use the http server ssl command to run HTTP over a secure socket. This command enables the HTTP

server to run SSL when accessing web pages or files provided by the HTTP server of the router and

disables access through the regular HTTP port.

Use the no form of this command to disable the HTTP server.

Enabling the HTTP server enables authentication by default. After the HTTP server has been enabled,

you then are prompted to provide a username and password to access web pages on the HTTP server.

The http server command enables the HTTP server process on Management Ethernet interfaces by

config-services

Cisco ASR 14000 Series Router System Management Command Reference

http server [ssl] [access-group name]

no http server

of the access control list (ACL) specified for the name argument.

(Optional) Enables Secure Socket Layer (SSL).

Modification

This command was introduced on the Cisco ASR 14000 Series Router.

Manageability Commands on Cisco IOS XR Software

Table of Contents