Cisco ASR 14000 Series Management Command Reference page 45

Boot Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Task ID Task ID
root-lr
Examples The following example shows how to back up the software and configuration files.
•
•
•
RP/0/RP0/CPU0:router# admin
RP/0/RP0/CPU0:router(admin)# system backup disk1:
Info:
Info:
Info:
Info:
Info:
Info:
Info:
Info:
Info:
Related Commands Command
show system backup
system boot-sequence
system backup
OL-17231-01
Operations
read, write
The command is run in administration EXEC mode, which backs up both the administration and
SDR configurations.
The target device is defined as disk1.
Because this is the first backup on the device, the disk is formatted.
node0_0_CPU0: formatting target device
node0_0_CPU0: copying admin configuration
node0_0_CPU0: copying SDR configuration
node0_0_CPU0: copying installed software
node0_0_CPU0: backup complete.
node0_0_CPU0: verifying admin configuration
node0_0_CPU0: verifying installed software
node0_0_CPU0: verify complete.
node0_0_CPU0: command succeeded.
Description
Displays the system backup settings and history.
Defines the order of boot devices used to bring up a router. The secondary
device argument also defines the default backup target device used by the
system backup
Performs a backup of software and configuration files.
command.
Cisco ASR 14000 Series Router System Management Command Reference
system backup
SMR-41