Cisco ASR 14000 Series Management Command Reference page 483

Object Tracking Commands in Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
track
To initiate or identify a tracking process used to track the status of an object or list of objects, use the
track command in global configuration mode. To remove the tracking process, use the no form of this
command.
Syntax Description
track track-name
Defaults No default behavior or values
Command Modes Global configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
When you use the track command, you enter track configuration mode.
The track command is used in conjunction with all the following track commands and types:
•
•
•
•
•
Task ID Task ID
sysmgr
Examples The following example shows that the tracking process is configured to notify the network administrator
about the up state of the tracked object list every five seconds:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# track LIST2
RP/0/RP0/CPU0:router# track LIST2 delay up 5
OL-17231-01
track track-name
no track track-name
Name of track used for tracking objects; for example, track1.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
delay
show track
type line-protocol state
type list boolean
type route reachability
Operations
read, write
Cisco ASR 14000 Series Router System Management Command Reference
track
SMR-481