Cisco ASR 14000 Series Management Command Reference page 89

Clock Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
locale language
To set the default language of use, use the locale language command in global configuration mode. To
remove the locale language setting, use the no form of this command.
Syntax Description
language
Defaults No default behavior or values
Command Modes Global configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
This command is not fully supported at this time.
Note
To display a complete listing of the available language codes, use the online help (?) function:
RP/0/RP1/CPU0:router(config)# locale language ?
aa
ab
af
am
ar
as
ay
--More--
Task ID Task ID
host-services
Examples The following example shows how to set the language of use to English:
RP/0/RP0/CPU0:router(config)# locale language en
OL-17231-01
locale language language
no locale language
Specifies the language, where language is a two-character code. Case is not
important.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Operations
read, write
Cisco ASR 14000 Series Router System Management Command Reference
locale language
SMR-87