Cisco ASR 14000 Series Management Command Reference page 143

Configuration Management Commands on Cisco IOS XR Software
!
interface POS0/1/0/2
/ip
ipv4 address 10.32.45.157 255.0.0.0
keepalive disable
!
interface POS0/1/0/3
ipv4 address 10.32.45.158 255.0.0.0
keepalive disable
!
interface POS0/2/0/0
ipv4 address 10.32.45.159 255.0.0.0
keepalive disable
!
--More--
The following is partial sample output from the more disk0:config.backup | begin ipv4 command. The
output begins with unfiltered output from the first line that contains the regular expression "ipv4." In this
example, a new search is specified that begins with output lines that contain the regular expression
"ipv4."
RP/0/RP0/CPU0:router# more disk0:config.backup | begin ipv4
ipv4 address 2.2.2.2 255.255.255.255
!
interface pos0/3/1/0
shutdown
!
interface pos0/3/1/2
shutdown
!
interface POS0/2/1/0
ipv4 address 1.1.1.1 255.255.255.0
keepalive disable
!
interface POS0/2/1/1
ipv4 address 1.1.1.1 255.255.255.0
keepalive disable
!
interface POS0/2/1/2
ipv4 address 1.1.1.1 255.255.255.0
keepalive disable
!
interface POS0/2/1/3
shutdown
!
/ipv4
filtering...
ipv4 address 1.1.1.1 255.255.255.0
proxy-arp disable
shutdown
!
interface pos 0/1/0/0
ipv4 address 1.1.1.1 255.255.255.0
proxy-arp disable
!
route ipv4 0.0.0.0/0 12.25.26.5
route ipv4 223.255.254.254/32 12.25.0.1
end
The following is partial sample output of the more command on the sample file config.backup in disk0:.
The command usage is more disk0:config.backup | include log. At the --More-- prompt, a new search
is specified that begins with output lines that contain the regular expression "aaa."
OL-17231-01
Cisco ASR 14000 Series Router System Management Command Reference
more
SMR-141