Cisco ASR 14000 Series Management Command Reference page 301

Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the command to display the nodes on the router.
You can also enter a partially qualified location specifier by using the wildcard (*) character. For
example, 0/1/* would display information for all modules on slot 1 in rack 0.
Use the show hw-module subslot registers command to display register information for the specified
internal hardware device on the SPA.
Task ID Task ID
root-lr
Examples The following example shows sample output for the show hw-module subslot registers command:
RP/0/RP0/CPU0:router# show hw-module subslot 0/2/CPU0 registers
BAY 0 registers info:
------------------------
SPA hardware ID : 0x1
SPA SW FPGA rev.: 0x10
BAY 1 registers info:
------------------------
SPA hardware ID : 0x90000000
SPA SW FPGA rev.: 0xD
Table 36
Table 36
Field
SPA hardware ID
SPA SW FPGA rev.
1. field-programmable gate array
Related Commands Command
show controllers
OL-17231-01
Operations
read
describes the significant fields shown in the display.
show hw-module subslot registers Field Descriptions
Description
Displays the controller type and other information.
Cisco ASR 14000 Series Router System Management Command Reference
Description
SPA hardware identifier in hexadecimal format.
1
SPA software FPGA revision number in hexadecimal format.
show hw-module subslot registers
SMR-299