Cisco ASR 14000 Series Management Command Reference page 605

SNMP Server Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
snmp-server context
To create a Simple Network Management Protocol (SNMP) context, use the snmp-server context
command in global configuration mode. To remove an SNMP context, use the no form of this command.
Syntax Description
context-name
Defaults No default behavior or values
Command Modes Global configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
This command creates an SNMP context. By default all the SNMP MIB instances are in a default
context. Create an SNMP context and map it to a particular feature to enable similar instances of the
same object to co-exist in different SNMP contexts.
Task ID Task ID
snmp
Examples
The following example creates a new SNMP context named "sample1:"
RP/0/RP0/CPU0:Router(config)# snmp-server context sample1
Related Commands Command
snmp-server community-map
snmp-server vrf
OL-17231-01
snmp-server context context-name
no snmp-server context context-name
Name of the SNMP context.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Associates an SNMP community with an SNMP context, security
name, or a target list.
Configures the VRF properties of SNMP.
Cisco ASR 14000 Series Router System Management Command Reference
snmp-server context
SMR-603