Cisco ASR 14000 Series Management Command Reference page 591

SNMP Server Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show snmp interface
To display the interface index identification numbers (ifIndex values) for all the interfaces or a specified
interface, use the show snmp interface command in EXEC mode.
Syntax Description
type
interface-id
ifindex
Defaults Enter the show snmp interface command without keywords or arguments to display the ifIndex value
for all interfaces.
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
snmp
Examples
The following example displays the ifIndex value for a specific interface:
RP/0/RP0/CPU0:Router# show snmp interface pos 0/1/0/1 ifindex
ifName : POS0/1/0/1
The following example displays the ifIndex value for all interfaces:
RP/0/RP0/CPU0:Router# show snmp interface
ifName : Loopback0
ifName : POS0/1/0/1
OL-17231-01
show snmp interface [type interface-id ifindex]
(Optional) Interface type. For more information, use the question mark (?)
online help function.
(Optional) Identifies a physical interface or a virtual interface.
Note Use the show interfaces command to see a list of all possible interfaces
currently configured on the router.
For more information about the syntax for the router, use the question mark (?)
online help function.
(Optional) Displays the ifIndex value for the specifies interface.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
ifIndex : 12
ifIndex : 1
ifIndex : 12
Cisco ASR 14000 Series Router System Management Command Reference
show snmp interface
SMR-589