Cisco ASR 14000 Series Management Command Reference page 561

Process and Memory Management Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show placement location
To display all placeable processes by location, use the show placement location command in EXEC
mode.
Syntax Description
node-id
all
Defaults No default behavior or values
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
The show placement location command identifies the process placement locations, the operational state
of the nodes, and the processes currently running on the nodes.
To display the node location and operational state for a program, use the show placement program
command.
Task ID Task ID
sysmgr
Examples
The following example shows all the nodes on the routing system and the placeable programs on those
node locations:
RP/0/RP0/CPU0:router# show placement location all
Locations: [0/RP0/CPU0] 0/RP1/CPU0 (RP)
State: running
Programs placed at this location:
rt_check_mgr
fm_server
fm_script_dir
fm_metric_dir
fm_fd_stats
fm_fd_hardware
fm_fd_drvinfra
OL-17231-01
show placement location {node-id | all}
The node-id argument is expressed in the rack/slot/module notation.
Displays all placement locations.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
Primary: yes Paired: no
Cisco ASR 14000 Series Router System Management Command Reference
show placement location
SMR-559