Cisco ASR 14000 Series Management Command Reference page 625

SNMP Server Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
snmp-server packetsize
To establish control over the largest Simple Network Management Protocol (SNMP) packet size
permitted when the SNMP server is receiving a request or generating a reply, use the snmp-server
packetsize command in global configuration mode. To restore the default value, use the no form of this
command.
Syntax Description size
Defaults size: 1500
Command Modes Global configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the snmp-server packetsize command to establish control over the largest SNMP packet size
permitted when the SNMP server is receiving a request or generating a reply.
Task ID Task ID
snmp
Examples
The following example shows how to set the maximum size of SNMP packets to 1024 bytes:
RP/0/RP0/CPU0:Router(config)# snmp-server packetsize 1024
OL-17231-01
snmp-server packetsize size
no snmp-server packetsize
Packet size in bytes. Range is from 484 to 65500.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Cisco ASR 14000 Series Router System Management Command Reference
snmp-server packetsize
SMR-623