Cisco ASR 14000 Series Management Command Reference page 600

snmp-server community
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
snmp-server community
To configure the community access string to permit access to the Simple Network Management Protocol
(SNMP), use the snmp-server community command in global configuration mode. To remove the
specified community string, use the no form of this command.
Syntax Description clear
encrypted
string
view view-name
RO
RW
SDROwner
SystemOwner
access-list-name
Defaults By default, an SNMP community string permits read-only access to all MIB objects.
By default, a community string is assigned to the SDR owner.
Command Modes Global configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Cisco ASR 14000 Series Router System Management Command Reference
SMR-598
snmp-server community [clear | encrypted] community-string [view view-name] [RO | RW]
[SDROwner | SystemOwner] [access-list-name]
no snmp-server community community-string
(Optional) Specifies that the entered community-string is clear text and should
be encrypted when displayed by the show running command.
(Optional) Specifies that the entered community-string is encrypted text and
should be displayed as such by the show running command.
Community string that acts like a password and permits access to the SNMP
protocol. If the clear keyword was used, string is assumed to be clear text. If the
encrypted keyword was used, string is assumed to be encrypted. If neither was
used, string is assumed to be clear text.
(Optional) Specifies the name of a previously defined view. The view defines the
objects available to the community.
(Optional) Specifies read-only access. Authorized management stations are able
only to retrieve MIB objects.
(Optional) Specifies read-write access. Authorized management stations are
able both to retrieve and to modify MIB objects.
(Optional) Limits access to the owner service domain router (SDR).
(Optional) Provides system-wide access including access to all non-owner
SDRs.
(Optional) Name of an access list of IP addresses allowed to use the community
string to gain access to the SNMP agent.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
SNMP Server Commands on Cisco IOS XR Software
OL-17231-01