Cisco ASR 14000 Series Management Command Reference page 273

Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
hw-module subslot shutdown
To administratively shut down a specific shared port adapter
shutdown command in global configuration mode. To return a SPA to the up state, use the no form of
this command.
Syntax Description
subslot-id
powered
unpowered
Defaults Shutdown is powered if no option is specified.
Command Modes Global configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
This command administratively shuts down the SPA in the specified subslot. Subslots that are shut down
still have power, but cannot load or operate Cisco IOS XR software.
Task ID Task ID
root-lr
Examples
The following example shows how to shut down the SPA in subslot 1 of the SPA interface processor
(SIP) in slot 2:
RP/0/RP1/CPU0:router# configure
RP/0/RP1/CPU0:router(config)# hw-module subslot 0/2/1 shutdown powered
Related Commands Command
shutdown
OL-17231-01
hw-module subslot subslot-id shutdown [powered | unpowered]
no hw-module subslot subslot-id shutdown
Specifies the subslot to be shut down. The subslot-id argument is entered in
the rack/slot/subslot notation.
(Optional) Retains power to the specified subslot.
(Optional) Powers down completely the specified subslot.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Disables an interface (forces an interface to be administratively down).
Cisco ASR 14000 Series Router System Management Command Reference
hw-module subslot shutdown
S PA), use the hw-module subslot
(
SMR-271