Cisco ASR 1000 Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. ASR 1000 Series
  6. Manual
Cisco ASR 1000 Manual

Cisco ASR 1000 Manual

Router spa interface processors (sips)
Hide thumbs Also See for ASR 1000:
Table of Contents

Advertisement

Quick Links

See also: Configuration Manual
Cisco ASR 1000 Series Router SPA Interface
Processors (SIPs)
This chapter describes the Cisco ASR 1000 Series Router SPA Interface Processors supported on the Cisco
ASR 1000 Series Routers.
This chapter contains the following sections:
For detailed documentation on Cisco ASR 1000 SIPs and SPAs, see:
•
•
Throughout this document, the term slot refers to the Cisco ASR 1000 Series Router chassis slot. The
Note
Cisco ASR 1000 Series Route Processor, Cisco ASR 1000 Series Embedded Services Processor, and
Cisco ASR 1000 Series SPA Interface Processor (SIP), and power supplies plug into these slots. Shared
port adapters plug into SIP bays.
•
•
Cisco ASR 1000 Series SPA Interface Processor
This section describes the Cisco SPA interface processors for the Cisco ASR 1006, Cisco ASR 1004, Cisco
ASR 1002, and Cisco ASR 1013 routers. The Cisco ASR 1000 Series Routers support the following Cisco
ASR 1000-SIPs:
• Cisco ASR 1000-SIP10—This SIP supports:
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
Cisco ASR 1000 Series SPA Interface Processor, page 1
SPA Interface Processor Slot Numbering, page 4
◦ 4 half height (¼ Rate or full rate or combination) SPAs with up to 16 ports per SPA
◦ 2 full height (¼ Rate or full rate or combination) SPAs with up to 32 ports per SPA
◦ 2 half height and 1 full height comb in at on that does not exceed 64 ports
◦ Up to 10 Gbps of oversubscription
Cisco ASR 1000 Series Router Hardware Installation Guide
1

Advertisement

Table of Contents
loading

Related Manuals for Cisco ASR 1000

Summary of Contents for Cisco ASR 1000

  • Page 1 • Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide Throughout this document, the term slot refers to the Cisco ASR 1000 Series Router chassis slot. The Note Cisco ASR 1000 Series Route Processor, Cisco ASR 1000 Series Embedded Services Processor, and Cisco ASR 1000 Series SPA Interface Processor (SIP), and power supplies plug into these slots.
  • Page 2 2 full height Cisco SPAs. The is a list of characteristics of the Cisco ASR 1000 Series SPA Interface Processors for the Cisco ASR 1006, Cisco ASR 1004, and Cisco ASR 1013 routers: •...
  • Page 3 Cisco ASR 1000 Series Router SPA Interface Processors (SIPs) Cisco ASR 1000 Series SPA Interface Processor SPA subslot 2 SPA subslot 3 Figure 1: Cisco ASR1000-SIP10 SPA Interface Processor, on page 3 shows the LEDs on the Cisco ASR1000-SIP10. Figure 1: Cisco ASR1000-SIP10 SPA Interface Processor...

  • Page 4: Spa Interface Processor Slot Numbering

    • Two half-height and 1 full-height combination that does not exceed 64 ports The slot numbering for the SPAs in the Cisco ASR 1004 Router is the same as in the Cisco ASR 1006 Router. Cisco ASR 1000 Series Router Hardware Installation Guide...

  • Page 5: Cisco Asr 1002 Router

    In the Cisco ASR 1002 Router, the Cisco ASR1002-SIP10 supports: • Three removable half-height SPAs on Bay 1, 2, and 3 • The fourth SPA is a built-in 4xGE SPA on Bay 0 located on the Cisco ASR 1000 Series RP1 Cisco ASR 1000 Series Router Hardware Installation Guide...

  • Page 6: Cisco Asr 1002-F Router

    • Built-in 4xGE SPA in bay 0, one half height SPA in bay 2, and one full height SPA in bay 1. The Cisco ASR 1000 Series SPA interface processor houses SPA bay 2 and SPA bay 3. SPA bay 0 and SPA bay 1 are physically located on Cisco integrated ASR1000-RP1.

  • Page 7: Cisco Asr 1013 Router

    • Two full-height (¼ Rate or full rate or combination) SPAs with up to 48 ports per SPA • Two half-height and 1 full-height combination that does not exceed 96 ports The Cisco ASR 1013 Router uses the same SPA subslot numbering as the Cisco ASR 1006 and Cisco ASR 1004 routers.
  • Page 8 Cisco ASR 1000 Series Router SPA Interface Processors (SIPs) Cisco ASR 1013 Router Figure 4: Cisco ASR 1013 Router Slot Numbering , on page 8 shows the slot numbering for the shared port adapters on the Cisco ASR 1013 Router.

  • Page 9: Cisco Asr 1001 Router

    For detailed information about specifying SIP subslot location for a SPA and specifying slot location for a SIP, see Cisco Aggregation Services Router 1000 Series SIP and SPA Software Configuration Guide Cisco ASR 1001 Router In the Cisco ASR 1001 Router, the Cisco ASR1000-SIP10 supports: •...

  • Page 10: Cisco Asr 1002-X Router

    • Three removable half-height SPAs in Bays 1, 2, and 3 • A built-in 6xGE SPA The SPAs on the Cisco ASR1002-X support online insertion and removal. However, the SIP on the Cisco Note ASR 1002-X Router is built into the chassis and is not a field-replaceable unit.

Table of Contents