Cisco ASR 14000 Series Management Command Reference page 356

install attach
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Examples
The following example, a software package is activated in asynchronous mode. In asynchronous mode,
the command runs in the background, and the CLI prompt is returned as soon as possible.
Use the install attach command to attach the terminal to an installation operation. This switches the
operation to synchronous mode, which allows the installation process to finish before the prompt is
returned.
In the following example, the install activate command is entered in asynchronous mode. The CLI
prompt returns before the operation is complete.
RP/0/RP0/CPU0:router# admin
RP/0/RP0/CPU0:router(admin)# install activate disk0:asr14k-mcast-3.7.6
Install operation 14 'install activate disk0:asr14k-mcast-3.7.6' started by user
'user_b' at 08:04:31 UTC Mon Nov 14 2005.
The install operation will continue asynchronously.
RP/0/RP0/CPU0:router(admin)#Info:
compatibility with
Info:
Info:
Info:
In the following example, the install attach command is used to attach the terminal to the installation
operation and complete the operation in synchronous mode. The CLI prompt is returned only after the
installation operation is complete:
RP/0/RP0/CPU0:router(admin)# install attach
Install operation 14 'install activate disk0:asr14k-mcast-3.7.6' started by user
'user_b' at 08:04:31 UTC Mon Nov 14 2005.
Info:
Info:
Info:
Info:
Info:
Info:
Info:
Info:
Info:
Info:
Info:
The currently active software is not committed. If the system reboots then the committed
software will be used. Use 'install commit' to commit the active software.
Install operation 14 completed successfully at 08:06:12 UTC Mon Nov 14 2005.
Related Commands Command
install activate
install add
install deactivate
Cisco ASR 14000 Series Router System Management Command Reference
SMR-354
newly activated software ...
SDR Owner: No incompatibilities found between the activated software
and router running configuration.
SDR Owner: Checking running configuration version compatibility with
newly activated software ...
SDR Owner: No incompatibilities found between the activated software
and router running configuration.
The changes made to software configurations will not be persistent
across system reloads. Use the command 'admin install commit' to make
changes persistent.
Please verify that the system is consistent following the software
change using the following commands:
show system verify
install verify
Description
Adds a software package or SMU to the active software set.
Adds the contents of a PIE file to a storage device.
Removes a package from the active software set.
Software Package Management Commands on Cisco IOS XR Software
SDR Owner: Checking running configuration version
OL-17231-01