Cisco ASR 14000 Series Management Command Reference page 186

show configuration failed remove
show configuration failed remove
To display information about a configuration that failed while being removed during installation
operations, use the show configuration failed remove command in EXEC or administration EXEC
mode.
Syntax Description
This command has no arguments or keywords.
Defaults
No default behavior or values
Command Modes
EXEC
Administration EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
config-services
Examples The following example shows a failed commit operation:
RP/0/RP0/CPU0:router# show configuration failed remove
!! SEMANTIC ERRORS: This configuration was rejected by
!! the system due to semantic errors. The individual
!! errors with each failed configuration command can be
!! found below.
multicast-routing
no address-family ipv4
!!% Process did not respond to sysmgr
address-family ipv4
no interface all enable
!!% Process did not respond to sysmgr
!
!
Because the configuration failed to be removed, it is still displayed in the output from the show
running-configuration command as expected:
Cisco ASR 14000 Series Router System Management Command Reference
SMR-184
show configuration failed remove
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
Configuration Management Commands on Cisco IOS XR Software
OL-17231-01