Cisco ASR 14000 Series Management Command Reference page 152

save configuration changes
save configuration changes
To save the changes of a configuration to a file, use the save configuration changes command in global
configuration or administration configuration mode.
Syntax Description
device:directory-path
Defaults
No default behavior or values
Command Modes Global configuration
Administration configuration
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
To save the configuration changes to be made during a replace operation to a file, use the save
configuration changes command.
Task ID Task ID
config-services
Examples The following example shows the configuration saved to disk0 from EXEC mode:
RP/0/RP0/CPU0:router(config)# save configuration changes disk0:sample3
Destination file name (control-c to abort): [/sample3]?
Building configuration.
1 lines built in 1 second
[OK]
RP/0/RP0/CPU0:router(config)#
Related Commands
Cisco ASR 14000 Series Router System Management Command Reference
SMR-150
save configuration changes device:directory-path
Storage device and directory path of the configuration file to be loaded into
the target configuration.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
Configuration Management Commands on Cisco IOS XR Software
OL-17231-01