Cisco ASR 14000 Series Management Command Reference page 72

show cdp traffic
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show cdp traffic
To display information about the traffic gathered between devices using Cisco Discovery Protocol
(CDP), use the show cdp traffic command in EXEC mode.
Syntax Description
location node-id
Command Modes
EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
cdp
Examples The following is sample output from the show cdp traffic command:
RP/0/RP0/CPU0:router# show cdp traffic
CDP counters :
Cisco ASR 14000 Series Router System Management Command Reference
SMR-70
show cdp traffic [location node-id]
(Optional) Displays detailed CEF information for the designated node. The
node-id argument is entered in the rack/slot/module notation.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
Packets output: 50662, Input: 40414
Hdr syntax: 0, Chksum error: 0, Encaps failed: 0
No memory: 0, Invalid packet: 0, Truncated: 0
CDP version 1 advertisements output: 0, Input: 0
CDP version 2 advertisements output: 50662, Input: 40414
Unrecognize Hdr version: 0, File open failed: 0
CDP Commands on Cisco IOS XR Software
OL-17231-01