Cisco ASR 14000 Series Management Command Reference page 316

show screddrv
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show screddrv
To display system controller (SC) redundancy information, use the show screddrv command in EXEC
mode.
Syntax Description
all
standby
Defaults
SC redundancy information is displayed for all nodes in the system.
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Enter the show screddrv command without any of the optional parameters to display summarized SC
redundancy and arbitration information for the router.
Task ID Task ID
system
Examples
The following is sample output from the show screddrv command with the all keyword:
RP/0/RP0/CPU0:router# show screddrv all
Redundancy Driver Info for slot 32:
Slot=32
Role=active role
State=ACTIVE STATE
Prefer_slot=0
Registers: ICreg=[1], MSreg=[33], MPPReg=[c0005cc8]
Tx error count=0
Rx error count=22
Comm Statistics=5632
SHOW REDDRV ARBITRATION is not supported.
Cisco ASR 14000 Series Router System Management Command Reference
SMR-314
show screddrv [all | standby]
(Optional) Displays redundancy details for the entire router.
(Optional) Displays detailed redundancy information for the standby
node.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software
OL-17231-01