Cisco ASR 14000 Series Management Command Reference page 29

Boot Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show mirror
To display disk mirroring information, use the show mirror command in EXEC or administration EXEC
mode.
Syntax Description
location node-id
all
Defaults
No default behavior or values
Command Modes EXEC
Administration EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
filesystem
Examples The following is sample output from the show mirror command:
RP/0/RP0/CPU0:router# show mirror
Mirror Information for 0/0/CPU0.
========================================================
Mirroring Enabled
Configured Primary:
Configured Secondary:
Current Mirroring State:
Current Physical Primary:
Current Physical Secondary: disk0:
Mirroring Logical Device:
Physical Device
--------------------------------------------------------
disk0:
OL-17231-01
show mirror [location {all | node-id}]
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
State
Available
Specifies RP node for which to display the mirroring information.
The node-id argument is expressed in rack/slot/module notation.
Displays mirroring information for all RP nodes in the router.
disk0:
disk1:
Syncing Files
disk1:
disk0:
Flags
Enabled Formatted
Cisco ASR 14000 Series Router System Management Command Reference
show mirror
SMR-25