Cisco ASR 14000 Series Management Command Reference page 334

clear install boot-options
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
clear install boot-options
To clear the boot options for a specified location or for all locations, use the clear install boot-options
command.
Syntax Description
location node-id
all
Defaults
If no location is specified, the clear install boot-options command prompts you for confirmation and
clears boot options for all locations.
Command Modes Administration EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the clear install boot-options command to clear boot options that were set using the install
boot-options command.
Task ID Task ID
pkg-mgmt
Examples The following example shows how to clear the boot options for all locations:
RP/0/RP0/CPU0:router(admin)#clear install boot-options
Install operation 4 '(admin) clear install boot-options location all' started
by user 'salevy' via CLI at 14:03:34 DST Sat Mar 15 2008.
Proceed with clearing boot options for all nodes? [confirm]
Install operation 4 completed successfully at 14:03:49 DST Sat Mar 15 2008.
Cisco ASR 14000 Series Router System Management Command Reference
SMR-332
clear install boot-options [location node-id | all]
Specifies a node. The node-id argument is expressed in rack/slot/module
notation.
Clears boot options for all locations.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Software Package Management Commands on Cisco IOS XR Software
OL-17231-01