Cisco ASR 14000 Series Management Command Reference page 723

Terminal Services Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
transport output
To specify the transport protocols that can be used for outgoing connections from a line, use the
transport output command in the appropriate line configuration mode. To change or remove the
protocol, use the no form of this command.
Syntax Description
all
none
ssh
telnet
Defaults All protocols are allowed on the line.
Command Modes
Line console configuration
Line default configuration
Line template configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Any settings made with the transport output command override settings made with the
transport preferred command.
Task ID Task ID
tty-access
Examples
The following example shows how to set the default line template to prevent any outgoing transport
protocol connections:
RP/0/RP0/CPU0:router(config)# line default
RP/0/RP0/CPU0:router(config-line)# transport output none
OL-17231-01
transport output {all | none | ssh | telnet}
no transport output {all | none | ssh | telnet}
Specifies the Secure Shell (SSH) and Telnet transport protocols.
Specifies that the router rejects outgoing SSH and Telnet transport protocol
connections.
Specifies the SSH transport protocol.
Specifies the Telnet transport protocol.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Cisco ASR 14000 Series Router System Management Command Reference
transport output
SMR-721