Cisco ASR 14000 Series Management Command Reference page 296

show hw-module subslot errors
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
You can also enter a partially qualified location specifier by using the wildcard (*) character. For
example, 0/1/* would display information for all modules on slot 1 in rack 0.
Use the show hw-module subslot errors command to display error information related to the specified
internal hardware device on a SPA.
Task ID Task ID
root-lr
Examples The following example shows partial sample output for the show hw-module subslot errors command:
RP/0/RP0/CPU0:router# show hw-module subslot errors
Subslot 0/1/0 errors info:
------------------------
SPA inserted: YES
SPA type:
SPA operational state: READY
SPA last reset reason:
SPA last failure reason: UNKNOWN
Subslot 0/1/1 errors info:
------------------------
SPA inserted: YES
SPA type:
SPA operational state: READY
SPA last reset reason:
SPA last failure reason: UNKNOWN
Subslot 0/1/2 errors info:
------------------------
SPA inserted: NO
Subslot 0/1/3 errors info:
------------------------
SPA inserted: NO
Subslot 0/1/4 errors info:
------------------------
SPA inserted: YES
SPA type:
SPA operational state: READY
SPA last reset reason:
SPA last failure reason: UNKNOWN
Subslot 0/1/5 errors info:
------------------------
SPA inserted: YES
SPA type:
SPA operational state: READY
SPA last reset reason:
SPA last failure reason: UNKNOWN
Table 35
Cisco ASR 14000 Series Router System Management Command Reference
SMR-294
Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software
Operations
read
4xOC3 POS SPA
UNKNOWN
1x10GE XFP SPA
UNKNOWN
4xOC48 POS/RPR HHSPA
UNKNOWN
8xGE SPA
UNKNOWN
describes the significant fields shown in the display.
OL-17231-01