Cisco ASR 14000 Series Management Command Reference page 59

CDP Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
clear cdp counters
To reset Cisco Discovery Protocol (CDP) traffic counters to zero (0), use the clear cdp counters
command in EXEC mode.
Syntax Description
location node-id
Defaults
The counters are set to zero.
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
cdp
Examples
The following example shows how to clear CDP counters. The show cdp traffic output shows that all
traffic counters have been reset to zero (0).
RP/0/RP0/CPU0:router# clear cdp counters
RP/0/RP0/CPU0:router# show cdp traffic
CDP counters:
Related Commands Command
clear cdp table
show cdp traffic
OL-17231-01
clear cdp counters location node-id
Clears CDP traffic counters for the designated node. The node-id argument
is entered in the rack/slot/module notation.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Packets output: 0, Input: 0
Hdr syntax: 0, Chksum error: 0, Encaps failed: 0
No memory: 0, Invalid packet: 0, Truncated: 0
CDP version 1 advertisements output: 0, Input: 0
CDP version 2 advertisements output: 0, Input: 0
Unrecognize Hdr version: 0, File open failed: 0
Description
Clears and resizes the table that contains CDP information about neighbors.
Displays traffic information between devices gathered using CDP.
Cisco ASR 14000 Series Router System Management Command Reference
clear cdp counters
SMR-57