Cisco ASR 14000 Series Management Command Reference page 62

show cdp
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show cdp
To display global Cisco Discovery Protocol (CDP) information, including CDP version, timer, and
holdtime information, use the show cdp command in EXEC mode.
Syntax Description
This command has no arguments or keywords.
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the show cdp command to display CDP version, timer, and holdtime information relative to CDP
operations.
Task ID Task ID
cdp
Examples The following example shows how to use the show cdp command to verify the CDP global settings:
RP/0/RP0/CPU0:router# show cdp
Global CDP information:
Table 8
Table 8
Field
Sending CDP packets every 20 seconds Interval between transmissions of CDP advertisements.
Cisco ASR 14000 Series Router System Management Command Reference
SMR-60
show cdp
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
Sending CDP packets every 20 seconds
Sending a holdtime value of 30 seconds
Sending CDPv2 advertisements is not enabled
describes the significant fields shown in the display.
show cdp Field Descriptions
Definition
This field is controlled by the
CDP Commands on Cisco IOS XR Software
cdp timer command.
OL-17231-01