Cisco ASR 14000 Series Management Command Reference page 593

SNMP Server Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show snmp mib
To display a list of MIB module object identifiers (OIDs) registered on the system, use the show snmp
mib command in EXEC mode.
Syntax Description
object-name
detailed
dll
Defaults No default behavior or values
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the show snmp mib command to display a list of the MIB module instance identifiers registered on
the system.
Although the show snmp mib command can be used to display a list of MIB OIDs registered on the
system, the use of a Network Management System (NMS) application is the recommended alternative
for gathering this information.
The show snmp mib command is intended only for network managers who are familiar with Abstract
Syntax Notation One (ASN.1) syntax, and the Structure of Management Information (SMI) of Open
Systems Interconnection (OSI) Reference Model.
SNMP management information is viewed as a collection of managed objects, residing in a virtual
information store, termed the MIB. Collections of related objects are defined in MIB modules. These
modules are written using a subset of ASN.1, termed the SMI.
The definitions for the OIDs displayed by this command can be found in the relevant RFCs and MIB
modules. For example, RFC 1907 defines the system.x, sysOREntry.x, snmp.x, and snmpTrap.x OIDs,
and this information is supplemented by the extensions defined in the CISCO-SYSTEM-MIB.
Use the detailed keyword to display a list of the MIB module instance identifiers registered on the
system. The output displays additional details, such as DLL and configuration information.
Use the dll keyword to display a list of the MIB modules loaded into the agent. This command can be
used to find the supported MIBs.
OL-17231-01
show snmp mib [object-name | detailed | dll]
(Optional) Specific MIB object identifier or object name.
(Optional) Displays a list of all MIBs and corresponding dynamically loadable
library (DLL) names on the system.
(Optional) Displays a list of all MIB DLL filenames and the OID supported by
each DLL filename on the system.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Cisco ASR 14000 Series Router System Management Command Reference
show snmp mib
SMR-591