Cisco ASR 14000 Series Management Command Reference page 64

show cdp entry
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show cdp entry
To display information about a specific neighboring device or all neighboring devices discovered using
Cisco Discovery Protocol (CDP), use the show cdp entry command in EXEC mode.
Syntax Description
*
entry-name
protocol
version
Defaults This command displays information about a particular device that has been discovered by CDP.
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
cdp
Examples
The following is sample output from the show cdp entry command. Information about device ID,
address, platform, interface, holdtime, and version is displayed.
RP/0/RP0/CPU0:router# show cdp entry TBA04341195
-------------------------
Device ID: TBA04341195(sys-235)
SysName : sys-235
Entry address(es):
IP address: 172.16.23.9
Platform: WS-C6006,
Interface: MgmtEth0/RP1/CPU0/0
Port ID (outgoing port): 4/18
Holdtime : 157 sec
Version :
Cisco ASR 14000 Series Router System Management Command Reference
SMR-62
show cdp entry {* | entry-name} [protocol | version]
Displays all CDP neighbors.
Name of a neighbor about which you want information.
(Optional) Displays protocol information associated with CDP neighbor
entries.
(Optional) Displays version information associated with CDP neighbor
entries.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Capabilities: Trans-Bridge Switch
CDP Commands on Cisco IOS XR Software
OL-17231-01