C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Bulk Content Downloader (BCDL) Commands on
Cisco IOS XR Software
The Bulk Content Downloader (BCDL) provides the Cisco IOS XR software with high-performance
downloading capabilities. This capability is used by the following internal applications:
IPv4 and IPv6 unicast routing protocols—to provide the ability to download forwarding information
•
from the router Global Routing Information Base (GRIB) to the line cards.
IPv4 and IPv6 multicast routing protocols—to download the Multicast Routing Information Base
•
(MRIB) entries to consumers managing the Multicast Forwarding Information Base (MFIB) on the
various line cards and route processors (RPs).
•
Multiprotocol Label Switching (MPLS)—to download the Label Forwarding Information Base
(LFIB) entries to the line card.
Local Packet Transport Services (LPTS)—to maintain the Internal Forwarding Information Base
•
(IFIB) table on all nodes that do IP forwarding to and from the RPs.
Fabric Management—to update memberships for individual fabric group IDs (FGIDs) to selected
•
portions of the fabric hardware.
Context Distribution Service (CDS).
•
There is no configuration necessary for the BCDL. This module describes the available show commands
that you can use to see the status of the BCDL process.
OL-17231-01
Cisco ASR 14000 Series Router System Management Command Reference
SMR-1