Cisco ASR 14000 Series Management Command Reference page 162

save rollback changes
save rollback changes
To save the rollback changes, use the save rollback changes command in global configuration or
administration configuration mode.
Syntax Description
commit-id
last number-of-commits Saves the rollback changes for the last n commits
to commit-id
device:directory-path
Defaults
No default behavior or values
Command Modes Global configuration
Administration configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the save rollback changes command to save the changes that would be made in a configuration
rollback to a specific commit point or for a series of commits.
Task ID Task ID
config-services
Examples
The following example shows that the rollback changes for the commit point 5 are saved to the file
sample4 on disk0:
RP/0/RP0/CPU0:router(admin-config)# save rollback changes last 1 disk0:sample4
Destination file name (control-c to abort): [/sample4]?
Building configuration.
6 lines built in 1 second
[OK]
Cisco ASR 14000 Series Router System Management Command Reference
SMR-160
save rollback changes {commit-id | last number-of-commits | to commit-id} device:directory-path
Specific commit ID.
Saves rollback changes up to a specific commit-id.
Storage device and directory path of the configuration file to be loaded into
the target configuration.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
Configuration Management Commands on Cisco IOS XR Software
OL-17231-01