Cisco ASR 14000 Series Management Command Reference page 581

SNMP Server Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
notification linkupdown disable
To disable linkUp and linkDown trap notifications on a Simple Network Management Protocol (SNMP)
interface, use the notification linkupdown disable command in SNMP interface configuration mode.
To enable linkUp and linkDown trap notifications, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults LinkUp and linkDown trap notifications are enabled.
Command Modes SNMP interface configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
By default, linkUp and linkDown notifications are enabled on physical interfaces. Issue the notification
linkupdown disable command to disable linkUp and linkDown notifications on an interface.
Use the no form of this command to enable linkUp and linkDown notifications on an interface, if linkUp
and linkDown notifications have been disabled.
Task ID Task ID
snmp
Examples The following example shows how to disable linkUp and linkDown trap notifications on
Packet-over-SONET/SDH (POS) interface 0/0/1/0:
RP/0/RP0/CPU0:Router(config)# snmp-server interface pos 0/0/1/0
RP/0/RP0/CPU0:Router(config-snmp-if)# notification linkupdown disable
Related Commands Command
show snmp interface
snmp-server engineid
OL-17231-01
notification linkupdown disable
no notification linkupdown disable
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Displays the ifIndex value for an SNMP interface.
Specifies the identification number of the local SNMP engine.
Cisco ASR 14000 Series Router System Management Command Reference
notification linkupdown disable
SMR-579