Cisco ASR 14000 Series Management Command Reference page 322

upgrade hw-module fpd
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
upgrade hw-module fpd
To manually upgrade the current field-programmable device (FPD) image package on a module, use the
upgrade hw-module fpd command in administration EXEC mode.
Syntax Description
all
fpga-type
rommon
force
location
all
node-id
Defaults No default behavior or values
Command Modes Administration EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
During the upgrade procedure, the module must be offline (shut down but powered).
Cisco ASR 14000 Series Router System Management Command Reference
SMR-320
upgrade hw-module fpd {all | fpga-type | rommon} [force] location [all | node-id]
Upgrades all FPD images on the selected module.
Upgrades a specific field-programmable gate array (FPGA) image on
the module. Use the show fpd package command to view all available
FPGA images available for a specific module.
Upgrades the ROMMON image on the module.
(Optional) Forces the update of the indicated FPD image package on a
shared port adapter
requirements. Without this option, the manual upgrade upgrades only
incompatible FPD images.
Specifies the location of the module.
(Optional) Upgrades the FPD image of all modules in the router.
(Optional) Location of the module. Naming notation is rack/slot/subslot
and a slash between values is required as part of the notation.
For more information about the syntax for the router, use the question
mark (?) online help function.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software
S PA) that meets the minimum version
(
rack: Chassis number of the rack.
•
slot: Physical slot number of the SPA interface processor (SIP).
•
subslot: Subslot number of the SPA.
•
OL-17231-01