Cisco ASR 14000 Series Management Command Reference page 98

Router system

Hide thumbs Also See for ASR 14000 Series:

Table of Contents

RP/0/RP0/CPU0:router(config)# alias shint_both (intname) show interface $intname;show run

interface $intname

The following example shows the use of the alias shint_both in EXEC mode:

RP/0/RP0/CPU0:router(exec)# shint_both(POS1/2/3/4)

Two commands are issued, as follows:

RP/0/RP0/CPU0:router(exec)# show interface POS1/2/3/4; show run interface POS1/2/3/4

Related Commands

show aliases

Cisco ASR 14000 Series Router System Management Command Reference

Configuration Management Commands on Cisco IOS XR Software

Displays a summary of all command aliases.

Table of Contents