Cisco ASR 14000 Series Management Command Reference page 466

clear route ipv4
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
clear route ipv4
To clear entry of an IP prefix route as the basis to track route reachability, use the clear route ipv4
command in route tracking configuration mode.
Syntax Description
IP prefix and subnet
mask
Defaults
No default behavior or values
Command Modes Route tracking configuration
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
The clear route ipv4 command is accessed through route tracking configuration submode.
Task ID Task ID
sysmgr
Examples The following example shows the use of the clear route ipv4 command:
RP/0/RP0/CPU0:router# configuration
RP/0/RP0/CPU0:router(config)# track name1
RP/0/RP0/CPU0:router(config-track)# type route reachability
RP/0/RP0/CPU0:router(config-track-route)# clear route ipv4 10.56.8.10/16
Related Commands Command
route ipv4
track
type route reachability
Cisco ASR 14000 Series Router System Management Command Reference
SMR-464
clear route ipv4 {IP prefix and subnet mask}
An IP prefix consisting of the network and subnet mask (for example,
10.56.8.10/16).
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Configures an IP prefix and subnet as the basis to track route reachability.
Initiates or identifies a tracking process to track the status of an object; also
enters track configuration mode.
Configures tracking based on whether or not a route is part of a particular
routing table.
Object Tracking Commands in Cisco IOS XR Software
OL-17231-01