Cisco ASR 14000 Series Management Command Reference page 259

Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
env disable
To disable environment monitoring on the chassis, use the env disable command in administration
configuration mode. To reenable environment monitoring after it has been disabled, use the no form of
this command.
Syntax Description
This command has no arguments or keywords.
Defaults Environment monitoring is enabled.
Command Modes Administration configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
By default, environment monitoring related to temperature and voltage is enabled on a router running
Cisco IOS XR software. If environmental monitoring is disabled, you are not alerted if the router
overheats.
Task ID Task ID
system
Examples
The following example shows how to disable environment monitoring with the env disable command:
RP/0/RP0/CPU0:router# admin
RP/0/RP0/CPU0:router(admin)# configure
RP/0/RP0/CPU0:router(admin-config)# env disable
Related Commands Command
env power-supply disable
OL-17231-01
env disable
no env disable
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Enables power supply monitoring on the chassis.
Cisco ASR 14000 Series Router System Management Command Reference
env disable
SMR-257