Cisco ASR 14000 Series Management Command Reference page 645

SNMP Server Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
snmp-server traps pim interface-state-change
To enable Protocol Independent Multicast (PIM) interface status notification, use the snmp-server traps
pim interface-state-change command in global configuration mode. To disable this command so no
notification is sent, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults Simple Network Management Protocol (SNMP) notifications are disabled by default.
Command Modes Global configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the
Use the snmp-server traps pim interface-state-change command to send notifications when a PIM
interface changes status from up to down. When the status is up, the notification signifies the restoration
of a PIM interface. When the status is down, the notification signifies the loss of a PIM interface.
PIM notifications are defined in the CISCO-PIM-MIB.my and PIM-MIB.my files that can be accessed
from the SNMP Object Navigator, available through cisco.com at
http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2.
Task ID Task ID
snmp
Examples The following example shows how to use the snmp-server traps pim interface-state-change
command:
RP/0/RP0/CPU0:Router(config)# snmp-server traps pim interface-state-change
RP/0/RP0/CPU0:Router(config)# snmp-server host myhost.cisco.com version 2c public
OL-17231-01
snmp-server traps pim interface-state-change
no snmp-server traps pim interface-state-change
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
snmp-server host command to specify which host or hosts receive SNMP notifications.
Operations
read, write
Cisco ASR 14000 Series Router System Management Command Reference
snmp-server traps pim interface-state-change
SMR-643