Cisco ASR 14000 Series Management Command Reference page 132

load
load
To populate the target configuration with the contents of a previously saved configuration file, use the
load command in global configuration or administration configuration mode.
Syntax Description
device:directory-path
Defaults
If the full path of the file is not specified, the present working directory is used.
Command Modes Global configuration
Administration configuration
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the
configuration. When loading a file, you must specify the device, directory path, and filename of the
configuration file.
Use the
load command, and use the commit command with the replace keyword to have the loaded
configuration become the active (running) configuration.
Use the
errors that occurred during the last load operation.
Task ID Task ID
config-services
Examples
The following example shows how to load a target configuration file into the current configuration
session. The current configuration session is then populated with the contents of the file.
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# load disk1:myconfig.cfg
RP/0/RP0/CPU0:router(config)# show config
Building configuration...
interface POS 0/3/0/0
Cisco ASR 14000 Series Router System Management Command Reference
SMR-130
load device:directory-path
Storage device and directory path of the configuration file to be loaded into
the target configuration.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
load command to populate the target configuration with the contents of a previously saved
commit command in conjunction with the load command. Load a new configuration with the
show configuration failed (config)
Operations
read, write
Configuration Management Commands on Cisco IOS XR Software
command with the optional load keyword to display syntax
OL-17231-01