Cisco ASR 14000 Series Management Command Reference page 439

Router system

Hide thumbs Also See for ASR 14000 Series:

Table of Contents

NTP Commands on Cisco IOS XR Software

C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1

The system clock must have been manually set from some source before the master command has an

effect. This precaution protects against the distribution of erroneous time after the system is restarted.

The following example shows how to configure a networking device as an NTP master clock to which

peers may synchronize:

RP/0/RP0/CPU0:router(config)# ntp

RP/0/RP0/CPU0:router(config-ntp)# master 9

Cisco ASR 14000 Series Router System Management Command Reference

Table of Contents