Cisco ASR 14000 Series Management Command Reference page 644

snmp-server traps ospf state-change neighbor-state-change
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Task ID Task ID
snmp
Examples The following example shows how to enable the router to send OSPF state-change notifications to the
host at the address myhost.cisco.com using the community string defined as public:
RP/0/RP0/CPU0:Router(config)# snmp-server traps ospf state-change neighbor-state-change
RP/0/RP0/CPU0:Router(config)# snmp-server host myhost.cisco.com version 2c public
Related Commands Command
snmp-server engineid
snmp-server host
snmp-server traps snmp
snmp-server traps syslog
Cisco ASR 14000 Series Router System Management Command Reference
SMR-642
Operations
read, write
Description
Specifies the identification number of the local SNMP engine.
Specifies the recipient of an SNMP notification operation.
Enables RFC 1157 SNMP notifications.
Enables SNMP notifications for Cisco-syslog-MIB error messages.
SNMP Server Commands on Cisco IOS XR Software
OL-17231-01