Cisco ASR 14000 Series Management Command Reference page 293

Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
You can also enter a partially qualified location specifier by using the wildcard (*) character. For
example, 0/1/* would display information for all modules on slot 1 in rack 0.
Use the show hw-module subslot counters command to display statistics related to the processing by
the specified internal hardware device.
Task ID Task ID
root-lr
Examples The following is sample output for the show hw-module subslot counters command:
RP/0/RP0/CPU0:router# show hw-module subslot 0/2/cpu0 counters
BAY 0 counts info:
-------------------
SPA inserted: YES
SPA type:
SPA operational state: READY
SPA insertion time:
SPA last time ready: Fri Nov 19 01:49:42 2004
SPA uptime [HH:MM:SS]: 49:49:29
BAY 1 counts info:
-------------------
SPA inserted: YES
SPA type:
SPA operational state: READY
SPA insertion time:
SPA last time ready: Fri Nov 19 01:49:35 2004
SPA uptime [HH:MM:SS]: 49:49:36
Table 34
Table 34
Field
SPA inserted
SPA type
SPA operational state
SPA insertion time
SPA last time ready
SPA uptime
OL-17231-01
Operations
read
5xGE SPA
Fri Nov 19 01:49:07 2004
1xOC192 POS/RPR HHSPA with XFP
Fri Nov 19 01:49:08 2004
describes the significant fields shown in the display.
show hw-module subslot counters Field Descriptions
Cisco ASR 14000 Series Router System Management Command Reference
Description
Indicates if a SPA is currently detected in the subslot.
Description of SPA including the technology type, number of
ports, height of SPA (HHSPA—single height,
FHSPA—double height), and optics type.
Current state of the SPA module.
Time the SPA module was last physically inserted or
power-cycled.
Time the SPA module last changed state to up or ready (the
last time the module was loaded or reloaded).
The time in service or amount of time since the module was
last out of service due to a reload, power cycle, or
configuration event.
show hw-module subslot counters
SMR-291