Cisco ASR 14000 Series Management Command Reference page 321

Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Cpuctrl Internal Info for node 0/4/CPU0:
.
.
.
Task ID Task ID
system
Examples The following example shows how to upgrade the CPU controller bits on all nodes in a router:
RP/0/RP0/CPU0:router# admin
RP/0/RP0/CPU0:router(admin)# upgrade cpucrtlbits all
Please do not power cycle, reload the router or reset any nodes until
all upgrades are completed.
Please check the syslog to make sure that all nodes are upgraded successfully.
If you need to perform multiple upgrades, please wait for current upgrade
to be completed before proceeding to another upgrade.
Failure to do so may render the cards under upgrade to be unusable.
Related Commands Command
show controller
cpuctrl internal
show platform
OL-17231-01
cpuctrl version info: Squid FPGA v2.07 Fri Jan 23 16:21:01 2004 ykoren
Error Interrupts = 0
PCI Error Overflows = 0
PCIX Error Overflows = 0
Port Error Overflows = 0
cpuctrl Config Reg = 0xffffffff
cpuctrl Window Size = 0x40000000 cpuctrl Port Window Size = 0x04000000
cpuctrl SHMem Size = 0x00800000
cpuctrl version info: SQUIRT v3
Operations
read, write
Description
Displays information about the internal CPU controller in the cards in the
router.
Displays information and status for each node in the system.
Cisco ASR 14000 Series Router System Management Command Reference
Spurious Error Interrupts = 0
PCI PM Error Overflows = 0
Internal Access PCI Overflows = 0
Error Log Overflows = 0
cpuctrl Physical Offset = 0x80000000
cpuctrl SHMem Used = 0x00224fb0
upgrade cpuctrlbits
SMR-319