Cisco ASR 14000 Series Management Command Reference page 63

CDP Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Table 8
Field
Sending a holdtime value of 30 seconds Time for which the device directs the neighbor to hold a
Sending CDPv2 advertisements is not
enabled
Related Commands Command
cdp advertise v1
cdp holdtime
cdp timer
clear cdp table
show cdp entry
show cdp interface
show cdp neighbors
show cdp traffic
OL-17231-01
show cdp Field Descriptions (continued)
Definition
CDP advertisement before discarding it. This field is
controlled by the
State of being enabled or disabled for the transmission of
CDP version 2-type advertisements. This field is controlled
by the
Description
Changes the version of CDP that is used to communicate with neighboring
devices to CDPv1.
Specifies the time for which the receiving device should hold a CDP packet
sent by your networking device before discarding it.
Specifies how often the software sends CDP updates.
Clears and resizes the table that contains CDP information about neighbors.
Displays information about a specific neighboring device or all neighboring
devices discovered using CDP.
Displays information about the interfaces on which CDP is enabled.
Displays information about neighboring devices discovered by CDP.
Displays traffic information between devices gathered using CDP.
Cisco ASR 14000 Series Router System Management Command Reference
cdp holdtime command.
cdp advertise v1 command.
show cdp
SMR-61