Cisco ASR 14000 Series Management Command Reference page 389

Software Package Management Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
3.
Task ID Task ID
pkg-mgmt
Examples The following sample output indicates that the audit is successful:
RP/0/RP0/CPU0:router# admin
RP/0/RP0/CPU0:router(admin)# show install audit file tftp:/10.2.2.2/install_list.txt
Install audit operation completed.
Install audit result: SUCCESS
The following sample output indicates that there are discrepancies between the packages installed on the
router and the supplied audit file:
RP/0/RP0/CPU0:router(admin)# show install audit file tftp://10.2.2.2/install_list.txt
Info:
Info:
Install audit operation completed.
Install audit result: FAILED (discrepancies found)
Related Commands Command
install activate
show install active
show install package
show install pie-info
show install which
OL-17231-01
A package specified in the audit file is present, but is not active on all nodes where it should be
–
active. For example, a package that goes only to RPs is not active on all RPs audited (either the
entire router or a specific SDR, depending on the scope of command).
– A package specified in the audit file is present, but is not active on some nodes where it should
be active. In this case, a list is provided of the nodes where the package is not active.
– An extra package that is not present in the audit file is active on all nodes being audited.
An extra package that is not present in the audit file is active on some nodes being audited. In
–
this case, a list is provided of the nodes where the package is active.
The command did not finish successfully, due to various errors. This can happen due to a failure to
parse the audit file, failure to get package information from the installation directory, and so on.
Operations
read
Package (asr14k-base-3.7.1.CSCxx12345) is not active only on node(s) 0/5/CPU0,
0/3/CPU0.
Description
Adds a software package or an SMU to the active software set.
Displays active software packages.
Displays information about a package.
Displays information about the packages contained in a PIE file.
Displays the origin of a component, package, or file.
Cisco ASR 14000 Series Router System Management Command Reference
show install audit
SMR-387