Cisco ASR 14000 Series Management Command Reference page 729

Terminal Services Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
width (display)
To set the width of the display terminal, use the width command in the appropriate line configuration
mode. To remove the width command from the configuration file and restore the system to its default
condition, use the no form of this command.
Syntax Description
characters
Defaults characters: 80
Command Modes Line console configuration
Line default configuration
Line template configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the width command to modify the default width setting for the specified line template.
Task ID Task ID
tty-access
Examples
The following example shows how to set the terminal width for the default line template to 99 characters:
RP/0/RP0/CPU0:router(config)# line default
RP/0/RP0/CPU0:router(config-line)# width 99
Related Commands Command
terminal width
OL-17231-01
width characters
no width characters
Number of characters to display on a screen. Range is from 0 to 512.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Sets the width of the display terminal for the current terminal session.
Cisco ASR 14000 Series Router System Management Command Reference
width (display)
SMR-727