Cisco ASR 14000 Series Management Command Reference page 383

Software Package Management Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show install active
To display active packages, use the show install active command in EXEC or administration EXEC
mode.
Administration EXEC Mode
EXEC Mode
Syntax Description summary
detail
verbose
sdr OWNER
location node-id
Defaults
No default behavior or values
Command Modes EXEC
Administration EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
This command displays output that is similar to the
Note
Use the show install active command to display the active software set for all nodes, or for specific
nodes. Enter the command in administration EXEC mode to display information for all nodes in all
SDRs.
OL-17231-01
show install active [detail | summary | verbose] [sdr OWNER | location node-id]
show install active [detail | summary | verbose] [location node-id]
(Optional) Displays a summary of the active packages in a system or secure
domain router.
(Optional) Displays a detailed summary of the active packages for a system,
secure domain router, or node.
(Optional) Displays a detailed summary of the active packages for a system,
secure domain router, or node, including component information for each
package.
(Optional. Administration EXEC mode only.) Displays the active packages
for a specific secure domain router (SDR). The only SDR available is
OWNER, which refers to the entire Cisco ASR 14000 Series Router router.
(Optional) Displays the active packages for a designated node. The node-id
argument is expressed in rack/slot/module notation.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
show install
Cisco ASR 14000 Series Router System Management Command Reference
show install active
command.
SMR-381