Cisco ASR 14000 Series Management Command Reference page 704

session-limit
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
session-limit
To set the maximum number of outgoing terminal sessions from the current terminal, use the
session-limit command in the appropriate line configuration mode. To remove any specified session
limit, use the no form of this command.
Syntax Description
connections
Defaults connections: 6
Command Modes Line console configuration
Line default configuration
Line template configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
tty-access
Examples The following example shows how to limit the number of active outgoing connections for the default line
template to eight:
RP/0/RP0/CPU0:router(config)# line default
RP/0/RP0/CPU0:router(config-line)# session-limit 8
Cisco ASR 14000 Series Router System Management Command Reference
SMR-702
session-limit connections
no session-limit
Maximum number of outgoing connections. Range is from 0 through 20.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Terminal Services Commands on Cisco IOS XR Software
OL-17231-01