Cisco ASR 14000 Series Management Command Reference page 651

SNMP Server Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
snmp-server traps pim rp-mapping-change
To enable notifications indicating a change in the rendezvous point (RP) mapping information due to
either Auto-RP or bootstrap router (BSR) messages, use the snmp-server traps pim
rp-mapping-change command in global configuration mode. To disable this command so no
notification is sent, use the no form of this command.
Syntax Description This command has no arguments or keywords.
Defaults
PIM SNMP notifications are disabled by default.
Command Modes Global configuration
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the
PIM notifications are defined in the CISCO-PIM-MIB.my and PIM-MIB.my files that can be accessed
from the SNMP Object Navigator, available through cisco.com at
http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2.
Task ID Task ID
snmp
Examples The following example shows how to use the snmp-server traps pim rp-mapping-change command:
RP/0/RP0/CPU0:Router(config)# snmp-server traps pim rp-mapping-change
RP/0/RP0/CPU0:Router(config)# snmp-server host myhost.cisco.com version 2c public
Related Commands Command
snmp-server engineid
snmp-server host
OL-17231-01
snmp-server traps pim rp-mapping-change
no snmp-server traps pim rp-mapping-change
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
snmp-server host command to specify which host or hosts receive SNMP notifications.
Operations
read, write
Description
Specifies the identification number of the local SNMP engine.
Specifies the recipient of an SNMP notification operation.
Cisco ASR 14000 Series Router System Management Command Reference
snmp-server traps pim rp-mapping-change
SMR-649